Products

‘S’ Series Syno Progressive Cavity Pumps are used for a wide variety of pumping and transfer duties. They are found in tough rugged industrial applications handling anything from abrasive slurries, aggressive or reactive chemicals, to viscous liquids, oils, or suspensions and aqueous solutions at elevated temperatures. These Screw pumps consists torsion free metal bonded stator for increased stator life, higher efficiency and per stage pressure. Simple Cost Iron constructions with internal rotating spare parts  and helical rotor of alloy steel / stainless steel / tool steel depending on the fluids to be handled. Shaft sealing ensured by gland packing with mechanical seal optional

Material of Construction Option :

ROTOR : Case Hardened Steel, Alloy Steel HCP, Stainless Steel UP/HCP

COUPLING ROD : Alloy Steel, Stainless Steel

STATOR : Natural, Nitrile, High Nitrile, EPDM, Chloro-Sulphonated Rubber, Fluoroelastomer

HOUSINGS : Cast Iron, Cast Steel, CastStainless Steel, Fabricated Steel and Stainless Steel

SPECIAL MATERIAL : Other Exotic options including Alloy 20, Haste alloy also available..

Fluids Handled :  Acidic & Alkaline slurry, Acrylic Emulsion, Black Liquor, Ceramic Slurry , Chemical Slurries, Dyestuff,Effluent, Emulsion, Explosive Slurry, Glue Paint, Magma, Molasses (all Grades),Oil, Petroleum jelly, Printing Ink, Solvents, Sodium Silicate , Sulphited Sugar Juice , Vegetable Oil , Viscose Yeast Etc.

Syno Progressive Cavity pump possesses an idle pumping principal for handling substances of extreme consistency. To gain full advantage of its versatility for such duties this pumping technique enables efficient & easy pumping of non-Newtonian or plastic viscous fluids. To achieve this function the pump is fitted with alloy steel-stainless steel auger-cum-coupling rod which pushes viscous substances into the pumping element i.e. helical rotor. For corrosive and hygienic application product retaining pockets are completely eliminated, avoiding bacteriological and chemical contamination. MOC available in wide range.

 
Material of Construction Option :

ROTOR : Case Hardened Steel, Alloy Steel HCP, Stainless Steel UP/HCP

COUPLING ROD : Alloy Steel, Stainless Steel

STATOR : Natural, Nitrile, High Nitrile, EPDM, Chloro-Sulphonated Rubber, Fluoroelastomer

HOUSINGS : Cast Iron, Cast Steel, CastStainless Steel, Fabricated Steel and Stainless Steel

SPECIAL MATERIAL : Other Exotic options including Alloy 20, Haste alloy also available..

‘F’ Series Syno Single Screw Pumps are designed specially for hygienic applications. All internal contours are designed to be swept away by product flow or by detergents when in line cleaning. All metallic parts incontact with the fluids are in smooth finish stainless steel, and stator is of non containing food grade elastomer viz. Nitrile, EPDM, silicon and viton. Shaft sealing ensured by gland packing or mechanical seal. These pumps are available in IDF/SMS, flanges or equivalent suction discharge and connections.

 
Material of Construction Option :

ROTOR : Stainless Steel (All Grades)

COUPLING ROD : Stainless Steel (All Grades)

STATOR : All Food Grade Elastomers

HOUSINGS : Stainless Steel (All Grades)

SPECIAL MATERIAL : Other Special material available on request..

Fluids Handled : Apple pulp, Amla pulp, Chocolate, Mix Minced Meat, Beer, Beverages, Molasses, Butter Oil, Cream, Curd Fruit pulp, Glucose Jam, Liquor, Sugar Syrup, Medical Formulations, Yeast, Yoghurt, etc.

The Syno BoreHole helical rotor / screw pump is the essence of simplicity in design. It is capable of handling sand laden water efficiently without due wear tear to its pumping element. Syno designed rotor and stator are immersed below draw-down level in the bore or well. The drive head is located at ground level for easy inspection, maintenance and installation. Speed of the pump can be adjusted to match well yield. Provides advantage over irrigation pumps as it can be driven through motor engine or even a tractor which enhances its benefits esp. In remote areas or in areas of frequent power-cuts. ‘SBH’ series is available for 3” to 8” bores.

 
Material of Construction Option :

ROTOR : Case Hardened Steel, Alloy Steel HCP, Stainless Steel UP/HCP

COUPLING ROD : Alloy Steel, Stainless Steel

STATOR : Natural, Nitrile, High Nitrile

HOUSINGS/COLUMNS : Cast Iron, Cast Steel, CastStainless Steel, Fabricated Steel and Stainless Steel, Mild Steel

SPECIAL MATERIAL : Special material on request.
 
Fluids Handled : Water
 

Syno ‘DC’ Progressive Cavity Pumps Designed for use where accurate, low flow applications demanding high accuracies for either intermittent or continuous dosing, the compact ‘DC’ pumps have high tolerance to aggressive chemicals and the renowned reliability of Syno . The repeatability accuracy has less than ± 1% fluctuation. The pump is self priming, and the gentle non pulsating pumping action helps maintain product integrity with even the most difficult materials. The range of suitable substances includes viscous and slurry products, solids in suspension and air/liquid/solids mixtures. These versatile pumps have output directly proportional to speed.

Material of Construction Option:

ROTOR : Case Hardened Steel, Alloy Steel HCP, Stainless Steel UP/HCP

COUPLING ROD : Alloy Steel, Stainless Steel

STATOR : Natural, Nitrile, High Nitrile, EPDM, Chloro-Sulphonated Rubber, Fluoroelastomer

HOUSINGS : Cast Iron, Cast Steel, CastStainless Steel, Fabricated Steel and Stainless Steel

SPECIAL MATERIA : Other Exotic options including Alloy 20, Haste alloy also available..

FLUIDS HANDLED : Focculant & Chemicals, Waste Water Treatment, Pulp & Paper, Pharmaceutical, Cosmetics, Mining ,Food,
etc